Oil materials
Process fluids that
Liquid detergents
European quality
tel. / fax: +38 (0622)2-91-46
mob.: +38(050)475-21-26
Skype:slavoilcom

Hydroway® brand 200

Fire-resistant hydraulic fluid. Steel is used in hydraulic equipment, casting machines. Unlike mineral oils significantly improves the safety of operation.

Hydroway® brand 1100

The semisynthetical biostable lubrication-cooling technologuical facilities (LCTF) for the edge cutting machining, the abrasive machining and the forming operation. It is recommended for the edge cutting machining, after-irradiation of metal.

 Hydroway® brand 800

It is used for cold steel rolling at the rolling mills of the USSR production with the moderate speed rolling and the level of drafting. It has the optimal number of saponification (about 22 mg КОН/g) for above rolling mills. It also can be used for the oiling and the passivation treatment of the etching hot-rolled steel before the reel in the roll. High frictional characteristics Н series 800 provide a good “roll-out”, an achievement of the thickness of the rolled metal up to 0,4 mm from the semi-finished rolled products 1,8-2,2 mm on the four cage rolling mill at low specific consumption of the emulsifying concentrate (up to 0,4 kg for 1t of the rolled metal). Due to this the minimal cull of the metal concerning pollution and stain formation after annealing is provided.

 Hydroway® brand 150

This lubricant is used for the cold steel rolling at the high-speed rolling mills and the rolling mills with high level of the drafting. It has the high number of the saponification (modifications with the saponification number 35, 80, 100, 150 mg КОН/g). It can be used at the rolling mills of the leading foreign companies. This lubricant has the high thermal stability. It does not form the pollution at the rolling. It provides the high quality of the metal after annealing.

Lubricant lithium semifluid Mariol®-450

It is used for the reduction gears of the industrial equipment. This lubricant is offered instead of the standard transmission oils. Due to the unique non-Newtonian characteristics, Mariol® 450 combines the quality and the advantages of oils and lubricants. It has been filled in the crankcase like a fluid and it acts like a fluid but it acts like a lubricant in the seals, the stuffing boxes and etc. So, due to the sharp decrease of leakage, the consumption of the lubricating material is reduced in 5-11times.

At the same time the tribology of friction is increasing and the wear of pair of friction is decreasing accordingly and the service life of the crankcases is increasing.

Semifluid lithium lubricant Mariol - pressol®

It is used for the centralized lubrication systems of the sliding bearings (Rolgang and etc.).It has the better thermal-resistance, the water-resistance in comparison with the complex calcium lubricant UNIOL 2M/2type. It provides the reliability and the longevity of the expensive bearings operation. The consumption is decreasing for а 20-40% due to the better colloid structure and the high adhesion (stick).