Oil materials
Process fluids that
Liquid detergents
European quality
tel. / fax: +38 (0622)2-91-46
mob.: +38(050)475-21-26
Skype:slavoilcom

Grease lithium semifluid  brand Mariol®-450

It is used for the reduction gears of the industrial equipment. This grease is offered instead of the standard transmission oils. Due to the unique non-Newtonian characteristics, Mariol 450 combines the quality and the advantages of oils and lubricants. It has been filled in the crankcase like a fluid and it acts like a fluid but it acts like a lubricant in the seals, the stuffing boxes and etc. So, due to the sharp decrease of leakage, the consumption of the lubricating material is reduced in 5-11times.At the same time the tribology of friction is increasing and the wear of pair of friction is decreasing accordingly and the service life of the crankcases is increasing.

Semifluid lithium Grease  brand Mariol – pressol®

It is used for the centralized lubrication systems of the sliding bearings (Rolgang and etc.).It has the better thermal-resistance, water-resistance in comparison with the complex calcium lubricant UNIOL 2M/2type. It provides the reliability and the longevity of the expensive bearings operation. The consumption is decreasing for а 20-40% due to the better colloid structure and the high adhesion (stick).

Hydroway® brand 150

This grease is used for the cold steel rolling at the high-speed rolling mills and the rolling mills with high level of the drafting. It has the high number of the saponification (modifications with the saponification number 35, 80, 100, 150 мг КОН/g). It can be used at the rolling mills of the leading foreign companies. This lubricant has the high thermal stability. It does not form the pollution at the rolling. It provides the high quality of the metal after annealing.

Hydroway® brand 300

The testing-conservation facilities. This fluid can be used for the conservation at the storage because it protects the hydrosystem from the corrosion and it does not damage it at low temperatures. It is produced of three brands (315, 330, 355), which have different temperatures of the solidification (-15, -30, -50 accordingly).

Hydroway brand 500

It is used for the cutting technology and the metal forming. Brand МR-7 is used for the procedures of steel and alloys cutting , screw cutting, gear machining, by turning automatic machine at light, medium and hard working conditions of the processing. It is efficient for the treatment of the bearing steel.Brand МR-3 is used for operations of the deep drilling of steel.Brand КP is used at hard operations for processing of steel and alloys by cutting and pressure.

Hydroway® brand 600

The emulsion biostable lubrication-cooling fluids (LOF) for edge cutting machining, abrasive machining and forming operation. It is the mixture of the oil base, emulsifiers, inhibitors of corrosion of metals, lubrication and biocide additives.

Hydroway® brand 700

The synthetical biostable lubrication-cooling technological facilities (LCTF) for edge cutting machining and abrasive machining and forming operation. They are the mixture of the surface-active facilities, inhibitors of corrosion of metals, lubrication and biocide additives and biostatics. They have not oil products.

Hydroway® brand 800

It is used for cold steel rolling at the rolling mills of the USSR production with the moderate speed rolling and the level of drafting. It has the optimal number of saponification (about 22 mg КОН/g) for above rolling mills. It also can be used for the oiling and the passivation treatment of the etching hot-rolled steel before the reel in the roll. High frictional characteristics Н series 800 provide a good “roll-out”, an achievement of the thickness of the rolled metal up to 0,4 mm from the semi-finished rolled products 1,8-2,2 mm on the four cage rolling mill at low specific consumption of the emulsifying concentrate (up to 0,4 kg for 1t of the rolled metal). Due to this the minimal cull of the metal concerning pollution and stain formation after annealing is provided.